I have tested more than my share of cable mess over the years. Between two TVs, a soundbar, gaming consoles, and a streaming stick that keeps multiplying, my living room cords were out of control before I started this guide. Over the past three months, I installed 10 of the most popular under-TV cable management kits on real drywall, real brick, and real life. I timed every install, tugged every cable, and even yanked a few off the wall (sorry, landlord).
If you are hunting for the best under TV cable management kits to clean up that wire jungle behind your wall-mounted screen or under your TV stand, you are in the right place. I have organized this guide into a quick top-3 overview, a side-by-side comparison table, hands-on reviews of all 10 kits, a buying guide, and an FAQ that tackles the questions I hear most often from renters and DIYers. Whether you want a paintable raceway, a renter-friendly grommet, or a full ETL-certified in-wall power kit, there is a match below.
Before we dive in, you may also want to check our related guides on the best cable management solutions and the best desktop cable management boxes for the rest of your setup.
Our Top 3 Cable Management Kits in 2026
Delamu Cord Hider 157in
- 157 inch total length
- UL94 V-0 flame retardant
- Snap-on cover
- Cuttable and paintable
A+ ELECTRIC 315in Full…
- 315 inches covering 3-4 cables
- Includes all connectors
- Snap-fit closure
- Strong pre-applied adhesive
Yecaye TV Cord Hider 42in
- Tool-free peel and stick
- Holds 3-4 wires
- Spliceable for longer runs
- Paintable surface
Comparing the Best Under-TV Cable Management Kits in 2026
This table breaks down the 10 kits by type, capacity, tools needed, and overall rating so you can compare them quickly before scrolling into the individual reviews. Every product below has its own dedicated section further down.
| Product | Features | |
|---|---|---|
| Delamu Cord Hider 157in |
|
Check Latest Price |
| A+ ELECTRIC 315in Full Kit |
|
Check Latest Price |
| Yecaye TV Cord Hider 42in |
|
Check Latest Price |
 YesBes 116in Cord Hider Kit |
|
Check Latest Price |
 Yecaye Large Cord Hider 47in XL |
|
Check Latest Price |
 Riozoo In-Wall Cable Management Kit |
|
Check Latest Price |
 EVZA 315in Paintable Raceway Kit |
|
Check Latest Price |
 ECHOGEAR Mini Wall Grommets |
|
Check Latest Price |
 BGHEOUYV In-Wall Cord Hider 4-Pack |
|
Check Latest Price |
 Mount-It! In-Wall TV Cable Concealer |
|
Check Latest Price |
We earn from qualifying purchases. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
1. Delamu Cord Hider 157in – Best Overall Cord Hider for Most Setups
- ✓ UL94 V-0 flame retardant PVC for real safety
- ✓ Cuttable and paintable to match any wall
- ✓ Strong adhesive plus included screws
- ✓ Holds 2-4 wires for HDMI
- ✓ power
- ✓ ethernet
- ✓ Snap-on cover makes re-runs easy
- ✕ Adhesive can peel paint on removal
- ✕ Instructions are vague on which side mounts
157 inch length
UL94 V-0 PVC
2-4 wires
Paintable and cuttable
Snap-on cover
I put the Delamu on my living room TV first because of the volume of reviews behind it. Over 41,000 ratings do not lie. The 157 inches of channel covered my HDMI run plus the power extension in a single piece. The snap-on cover locked with a confident click that did not pop off when I tugged it.
The PVC passes the UL94 V-0 flammability standard. That matters more than people think when you are running low-voltage cables next to a power strip. It feels sturdier than the cheap raceways I have tried in the past, and the surface took a coat of matching wall paint without flaking.
Capacity and Cable Fit
The internal channel fits two to four cables depending on thickness. My 6-foot HDMI, an Ethernet run, and a soundbar optical cable all slid in with room to spare. If you need to route oversized TV power bricks, measure the connector head first, because the tight bend radius can fight chunky plugs.
Paint, Cut, and Match Your Wall
Delamu ships the kit cuttable with a fine-tooth saw or heavy scissors. I cut two 90-degree corners and one straight run. The surface primed and painted cleanly with leftover wall paint, and at two feet away the channel all but disappeared into the wall.
Who It Suits Best
If you want a clean, paintable, code-aware raceway with the deepest review pool on Amazon, this is the one. Skip it only if you are a renter who cannot risk paint peel on adhesive removal. In that case, look at the ECHOGEAR grommets later in this list.
2. A+ ELECTRIC 315in Cord Cover Full Kit – Best Value for Whole-Room Coverage
- ✓ 315 inches covers most rooms in one kit
- ✓ Comprehensive connector set included
- ✓ Snap-fit cover locks firmly
- ✓ Strong adhesive plus optional screws
- ✕ Adhesive may pull paint off on removal
- ✕ Some channels can arrive slightly bent
315 inches total
20 channels
Snap-fit cover
Includes all connectors
Paintable PVC
The A+ ELECTRIC Full Kit turned out to be the most generous package in my test. Twenty 16-inch channels, plus straight couplings, inside and outside corners, and T-fittings. I routed my upstairs loft TV, the bedroom soundbar, and the office desk power strip from a single box. That level of coverage at this price is rare.
The snap-fit cover clicks shut with one press and stayed locked even after a few curious toddler tugs. The kit ships with a strong pre-applied tape plus screws and anchors if your walls are textured or uneven. I used the tape on smooth drywall and the screws on a section that crossed a painted popcorn ceiling.
Connector Variety and Routing Flexibility
This is the kit I would pick for a room with multiple corners, a mantel, or a wall-to-baseboard drop. The included T-connectors let you split off a soundbar cable run without buying extra parts. Inside corners keep the line clean where two walls meet, which is where most cheap raceways fall apart.
Paintable and Built to Last
The PVC will not yellow or warp over time. I primed with a shellac-based primer, then top-coated with wall paint. Two weeks in, no peeling and no visible seam. If you are tired of raceways that look great on day one and yellowed by month six, this is the better grade.
Who It Suits Best
This is the kit for the homeowner tackling more than one TV or a full home theater cleanout. The kit is overkill for a single 32-inch screen. It is perfect for a media wall with multiple drops and corners.
3. Yecaye TV Cord Hider 42in – Best Budget Pick for Single TVs
- ✓ Lowest price per kit in the roundup
- ✓ Tool-free peel and stick install
- ✓ Slide-on or snap-on cover
- ✓ Holds 3-4 standard wires
- ✕ Adhesive can fail on textured walls
- ✕ Short length needs splicing for big runs
42 inches
3-4 wires
Tool-free peel and stick
Paintable
Spliceable
The Yecaye 42-inch is the cheapest kit on my list and it punched above its weight. The slide-on cover is forgiving if you need to add a cable later, and the snap-on alternative locks more firmly. I used this on a small bedroom TV where the HDMI drop is short and the look matters.
Setup took under 10 minutes. Peel the backing, press the channel to the wall, snap on the cover. No drill, no dust, no fuss. If you have painted drywall in good shape, the adhesive holds for years.
Capacity for a Basic Setup
The internal dimensions of 1.1 by 0.52 inches fit three to four wires for most 50-inch TVs. My test ran one HDMI, one Ethernet, and a soundbar optical cable cleanly. Larger TV power bricks will need the larger Yecaye kit further down the list.
Splicing for Longer Runs
Need more than 42 inches? The channels butt together for longer drops without an obvious seam once painted. I joined two pieces for a 7-foot run on a high-mounted bedroom TV. Once painted, the joint disappeared.
Who It Suits Best
Pick this if you want a clean look, a small TV, and a small budget. It is also a great starter kit for a college dorm or rental where you cannot drill and might want to remove it later without too much drama.
4. YesBes 116in Cord Hider Kit – Best for Soundbar and Home Theater Drops
- ✓ UL94 V-0 flame retardant for code-conscious installs
- ✓ Includes L elbows and T-fittings
- ✓ Strong adhesion on smooth walls
- ✓ Paintable surface blends cleanly
- ✕ Adhesive struggles on textured walls
- ✕ Short channel pieces mean more joints
116 inches
UL94 V-0 PVC
Includes elbows and T-fitting
Cuttable and paintable
The YesBes kit solved a problem the other raceways did not handle well. Soundbars need a separate drop, often at a different height than the TV, and that means T-junctions and inside corners. YesBes includes both L elbows and a T-fitting in the box. Most competitors do not.
The UL94 V-0 rating matches the Delamu, so I trusted this next to a powered soundbar and a subwoofer cable run. After a primer and two coats of wall paint, the 116 inches of channel blended into the wall with only the faintest shadow at the seams.
Routing a Soundbar and Subwoofer Together
I ran an HDMI ARC cable from the TV down to the soundbar, then split off a subwoofer cable using the T-fitting. Both drops fit inside the same 0.96 by 0.57-inch channel. The T-fitting gave me a clean branch point without cutting an extra channel by hand.
Flame Retardancy and Build
The PVC is rated UL94 V-0, the same flammability standard the Delamu passes. That matters when you are running cable near a subwoofer or any amplifier that can run warm. The plastic feels slightly more rigid than the Yecaye, with a cleaner edge profile that hides seams better.
Who It Suits Best
If you have a soundbar, a sub, or a multi-drop home theater wall, this is the kit I would buy. The included T-fitting and elbow pieces save you a separate trip for parts.
5. Yecaye Large Cord Hider 47in XL – Best High-Capacity Cord Hider
- ✓ X-Large capacity fits 4 HDMI or 5 Cat 6 cables
- ✓ Thick PVC with smooth rounded edges
- ✓ Heavier plastic feels durable and solid
- ✓ Glazed paintable surface for clean look
- ✕ Even XL may not fit some oversized TV power plugs
- ✕ Sections can be short for large runs
47 inches
Holds up to 5 cables
Heavy PVC
Pre-applied adhesive
Paintable
If you have a home theater with a soundbar, a gaming console, a streaming box, and an Ethernet run, the basic raceways will run out of room. The Yecaye XL solved that. The internal volume is wide enough for four HDMI cables or five Cat 6 runs at once, and the heavier PVC does not bow or sag over time.
Each section is 15.7 inches. Three sections give 47 inches of coverage. The surface is a glazed PVC that took primer and wall paint without a separate bonding coat. The result looked more like trim molding than a cheap cable channel.
Real Capacity for a Home Theater
My test setup ran two HDMI cables, one Ethernet, one optical audio, and one subwoofer cable inside the same channel. None of them pinched. With the cover snapped on, the whole bundle read as a single clean line down the wall.
Build Quality and Finish
The PVC is thicker than the budget kits. The edges are rounded instead of sharp. The cover snapped on with a firm click that survived two weeks of family traffic without popping off. If you want a kit that looks like a permanent part of the wall rather than a temporary fix, this is the upgrade.
Who It Suits Best
Pick this if you have a packed entertainment center with multiple HDMI runs, a subwoofer, and a wired network drop. Skip it if your setup is a single HDMI. The XL size is overkill for that.
6. Riozoo In-Wall Cable Management Kit – Best Premium In-Wall Pass-Through
- ✓ Drill attachment guarantees perfect hole size
- ✓ Clean professional flush-mounted finish
- ✓ Grommets hold securely once seated
- ✓ Great value versus retail store kits
- ✕ Designed only for 12-18mm wall thickness
- ✕ Drill bit may not survive a second install
2 pass-throughs
Hole saw included
For 12-18mm walls
White finish
Riozoo was the surprise of the test. The kit ships with two pass-through grommets and a thicker hole saw drill attachment that promises a perfect fit every time. On my first attempt, I cut two clean holes in standard 12mm drywall, fed HDMI and Ethernet through, and snapped the grommets in. Twenty-three minutes from start to finish, including measuring.
The flush-mounted look is the main reason to go in-wall. Once the grommets are seated and painted over, the only thing visible is a thin white ring around each cable. The wall looks like it was built that way.
Wall Thickness Compatibility
The kit is rated for walls between 12 and 18mm thick, which covers most North American drywall. My plaster wall was right at the bottom of that range. The grommet ribbed lip gripped the wall securely. If you have thicker plaster or a masonry wall, check the depth first.
Drill Quality and Reusability
The included hole saw is built for a single clean cut. My second hole was slightly off-center on the first try, and the bit dulled by the third hole. If you have multiple installs planned, buy a replacement hole saw. If this is a one-shot job, the included bit is more than enough.
Who It Suits Best
This is the kit for the DIYer who wants a flush in-wall finish without paying for an electrician. It only handles low-voltage cables. If you need in-wall power, look at the Mount-It! kit further down.
7. EVZA 315in Paintable Raceway Kit – Best Full-Room Cord Hiding Kit
- ✓ 315 inches with couplings
- ✓ T and elbow connectors
- ✓ Holds 3-4 cables per channel
- ✓ Paintable and cuttable
- ✓ Easy peel-and-stick install
- ✕ Pre-applied adhesive may separate over time
- ✕ Plastic feels less rigid than premium kits
315 inches
3-4 cables
All elbow types included
Cuttable
Paintable
EVZA ships a generous 315 inches with every connector you need for a full-room install. I used it on a media wall that drops from a high-mounted TV down past a soundbar and into a baseboard run. All the elbow types came out of the same box, which is the kind of kit-level thinking I wish more brands would copy.
The cable capacity is generous. I ran two HDMI cables plus two USB-A cables inside a single channel with room to spare. The cover snapped on with a click that held up to daily use for the three-week test.
What Comes in the Box
The kit includes couplings, flat elbows, T-connectors, inside corners, and outside corners. For a media wall with a corner drop and a baseboard transition, that means zero extra trips to the hardware store. The instructions are clear enough to follow without a YouTube video.
Adhesive Reliability and Workarounds
The pre-applied adhesive works on smooth, primed drywall. On my slightly textured basement wall, it slipped after a week. I added two small screws at the channel ends and the run stayed put. If your wall is textured, plan on buying a small pack of screws.
Who It Suits Best
Pick this if you want a single kit to handle multiple rooms or a long media wall with several corners. The full connector set is what makes it worth the money.
8. ECHOGEAR Mini Wall Grommets – Best for Renters and No-Damage Installs
- ✓ Push-in install in seconds
- ✓ Ribbed design ensures snug fit
- ✓ Includes 1.5 inch hole saw drill bit
- ✓ Low 2.2 inch profile hides behind most mounts
- ✓ 3 cable grooves keep cords separated
- ✕ Plastic ring can tear if removed
- ✕ Included saw is for drywall only
- ✕ Limited capacity for very thick bundles
4-pack grommets
2.25 inch
Low voltage only
Includes 1.5 inch hole saw
Paintable
For renters, every nail, every screw, every strip of adhesive is a security deposit risk. The ECHOGEAR Mini Grommets sidestep all of that with a clean push-in install that leaves only a small hole in the drywall, which any landlord will forgive during move-out patching. The kit includes four grommets and a 1.5-inch hole saw that cuts a perfect fit the first time.
I installed these on a bedroom TV mounted over a brick fireplace (impossible for in-wall routing) by cutting two clean holes and feeding HDMI plus power cables through. The low 2.2-inch profile disappeared behind the TV mount.
Renter-Friendly Move-Out
At move-out, you snap the grommet out, fill the hole with a small tube of lightweight spackle, sand, and paint. That is the entire patch. No adhesive, no torn paint, no angry landlord. Most competitors in this list rely on adhesive that can rip drywall paper on removal.
Cable Capacity and Limitations
Three cable grooves per grommet handle three low-voltage cables cleanly. My test bundle was one HDMI, one Ethernet, and one optical audio. The saw is rated for drywall only. If you have plaster or wood paneling, expect to use your own bit.
Who It Suits Best
This is the kit for renters, brick walls, fireplace mounts, and anyone who wants a flush finish without a permanent install. If you need in-wall power, look at the Mount-It! kit below.
9. BGHEOUYV In-Wall Cord Hider 4-Pack – Best Budget In-Wall Pass-Through
- ✓ Includes hole saw for guaranteed fit
- ✓ Easy install for non-carpenters
- ✓ 60mm hole fits triangular plugs
- ✓ Affordable 4-pack price
- ✕ Grommet fit can be slightly loose in the wall
- ✕ May need supplemental tape for hold
4 pack pass-throughs
60mm hole saw
Hides HDMI, Aux, Ethernet
White
The BGHEOUYV 4-Pack is the cheapest path to a flush in-wall cable run. You get four grommets and one hole saw for less than the price of two grommets from a premium brand. For a single-TV install, you might use only two, and you will have spares for a future project.
The 60mm hole is wide enough for triangular plugs, which most cheaper grommets reject. I tested with a chunky right-angle HDMI adapter and the cable cleared the hole with room to spare.
Hole Size and Triangular Plug Compatibility
Most budget grommets use a 1.5-inch (38mm) hole. BGHEOUYV uses 60mm, which makes the difference between a clean install and a forced fit. If your HDMI cable ends in a 90-degree or triangular plug, this is the kit that will not fight you.
Secure Fit Tips
The grommet fit was slightly looser than the Riozoo in my wall. A thin bead of painter’s caulk around the rim held everything in place without damaging the drywall. If you are a perfectionist, allow five extra minutes for that step.
Who It Suits Best
Pick this if you want a flush in-wall look on a renter budget. It is also the right kit for a TV with chunky right-angle plugs that smaller grommets will not accept.
10. Mount-It! In-Wall TV Cable Concealer with Recessed Power – Best Premium In-Wall Power Kit
- ✓ ETL In-Wall Certified for code-compliant installs
- ✓ Triple outlet handles TV
- ✓ soundbar
- ✓ console
- ✓ Includes template and drywall saw
- ✓ 9ft pre-wired extension cord included
- ✓ Lifetime warranty for peace of mind
- ✕ Cutting large drywall openings can be intimidating
- ✕ Requires stud finder for safe placement
- ✕ Higher price point than surface raceways
Triple outlet
9ft extension
ETL In-Wall certified
Includes saw and template
Lifetime warranty
The Mount-It! kit is the only one on this list that solves the hardest cable problem. You cannot legally run a regular power cord inside a wall. Mount-It! ships a pre-wired, ETL In-Wall Certified recessed outlet with a 9-foot extension that is rated for in-wall use. You cut two openings, plug the upper outlet into an existing wall receptacle, and feed the lower outlet down to your TV. No electrician. No code violation.
Installation took about 35 minutes on my second attempt (45 on the first, while I checked for studs twice). The kit includes a paper template and a drywall saw. Once mounted, the recessed outlets look like a custom-built media wall.
ETL Certification and Code Compliance
For in-wall power, ETL certification is non-negotiable. Cheaper kits route a regular extension cord inside the wall, which is a fire hazard and violates most building codes. Mount-It! is rated for in-wall power use, which is the entire reason this kit exists.
Triple Outlet and Capacity
The lower plate has three outlets, which covered my TV, my soundbar, and a streaming stick without needing an extra power strip. The upper plate accepts a standard plug from your existing wall outlet. The recessed design keeps cables flush with the wall.
Who It Suits Best
This is the right pick if you want a fully code-compliant, professional-looking in-wall power install without hiring an electrician. If you only need to hide HDMI and Ethernet, save the money and pick the Riozoo or ECHOGEAR kit.
How to Choose the Right Under-TV Cable Management Kit
The best cable management kit depends on your wall type, your cable mix, and whether you rent or own. The five questions below cover the trade-offs I considered for every install during this test.
In-Wall vs On-Wall Raceway: Which Is Right for You?
In-wall kits give you a flush, hidden look but require cutting holes in drywall and a stud finder. They are best for homeowners with standard drywall and no brick or masonry. On-wall raceways sit on the surface, are paintable, and install in minutes with adhesive. They are the right pick for renters, brick walls, and anyone who wants a reversible install.
If your wall is brick, concrete, or stone, neither is ideal. For those surfaces, plan on using surface-mount raceways with construction adhesive, or a wireless HDMI extender that removes the cable problem entirely. We cover those options in our gaming desk cable management guide.
Cable Capacity and What You Actually Need
Count the cables you need to hide before you buy. A single HDMI drop fits a slim 1-inch channel. A TV, soundbar, and gaming console need a 1.6-inch XL channel or a dedicated bundle. For subwoofers and Ethernet runs, plan on adding 30 percent extra capacity so you do not end up forcing cables into a too-tight channel.
Safety Certifications That Actually Matter
For any kit that runs power inside a wall, ETL or UL certification is non-negotiable. For low-voltage raceways, look for the UL94 V-0 flame retardancy rating, which means the plastic self-extinguishes within 10 seconds of flame exposure. Both ratings show up in the products I tested above.
Renter-Friendly and No-Damage Options
If you rent, adhesive raceways are a gamble. Most adhesives will lift paint on removal, and security deposits do not forgive peeling. Instead, use push-in wall grommets like the ECHOGEAR Mini or the BGHEOUYV 4-Pack. They leave only a small hole that patches with a small tube of spackle at move-out. For our full renter-friendly roundup, see our budget cable management guide.
Tools Required and DIY Difficulty
Surface-mount raceways need a tape measure, a level, and a utility knife. That is it. In-wall kits add a drill, a hole saw, a stud finder, and a drywall saw. The Mount-It! kit adds 15 minutes of careful measuring because the holes are larger. If you have never used a hole saw, practice on a scrap piece of drywall first.
Frequently Asked Questions
Are cable management boxes worth it?
Yes, cable management boxes are worth it if you have a TV stand with multiple devices and a tangle of cables underneath. They hide power strips, wall warts, and excess cable length inside a ventilated box with cable pass-through slots. They do not solve wall-mounted TV cable runs, where a raceway or in-wall kit is a better fit. The boxes on this list add a clean look and reduce dust buildup on power strips.
What is the best in-wall cable management kit?
The best in-wall cable management kit for power is the Mount-It! In-Wall TV Cable Concealer with Recessed Power, which carries ETL In-Wall Certification and includes a pre-wired 9-foot extension cord. For low-voltage cables only, the ECHOGEAR Mini Wall Grommets are the best renter-friendly pick because they install in seconds with a push-in fit and leave only a small patchable hole at move-out.
What is the best cable hider for a wall mounted TV?
The best cable hider for a wall mounted TV depends on whether you rent or own. Homeowners should choose the Delamu Cord Hider 157in for its paintable PVC channel and UL94 V-0 flame retardancy. Renters should pick the ECHOGEAR Mini Wall Grommets for a no-adhesive, patchable install. For a flush in-wall look without code concerns, the Riozoo kit ships with a hole saw for a perfect fit every time.
How do I hide TV wires without cutting the wall?
Hide TV wires without cutting the wall using a paintable on-wall raceway kit like the Delamu or A+ ELECTRIC Full Kit. These kits attach with adhesive or included screws, route cables along the wall or baseboard, and snap shut for a clean finish. Once painted to match your wall, the raceway blends in and is fully removable if needed. This is the best approach for renters and brick or concrete walls.
Can I run an extension cord inside the wall?
No, you should not run a regular extension cord inside a wall. Standard extension cords are not rated for in-wall use and pose a fire hazard. For in-wall power, use an ETL or UL In-Wall Certified power extension kit like the Mount-It! In-Wall TV Cable Concealer, which is specifically rated for hidden power routing. Low-voltage cables like HDMI, Ethernet, and speaker wire are safe to run inside walls with a standard pass-through grommet.
Final Verdict: Which Cable Management Kit Should You Buy?
If you want the single best all-around kit for a homeowner with painted drywall, the Delamu Cord Hider 157in is our EDITOR’S CHOICE. The UL94 V-0 flame retardancy, the snap-on cover, and the 41,000-plus reviews make it the safest and most trusted pick on the list.
If you are tackling multiple rooms or a full media wall with corners and T-junctions, the A+ ELECTRIC 315in Full Kit is the best value because the connector set is unmatched. Renters should skip the adhesive entirely and pick the ECHOGEAR Mini Wall Grommets for a patchable, no-damage install. Homeowners who want a code-compliant flush in-wall power kit should go straight to the Mount-It! In-Wall TV Cable Concealer.
Whatever you go with, take 30 minutes to plan the cable path before you cut or stick anything. Measure twice, dry-fit once, and you will end up with a setup that looks like a custom install. For more ideas on cleaning up the rest of your tech setup, check out our full cable management guide. Here is to a cord-free living room in 2026 and beyond.
