After 90 days of testing across two living rooms, one office, and a packed entertainment center, our team narrowed down the best HDMI 2.1 switches for gaming consoles in 2026. We pushed PS5, Xbox Series X, Nintendo Switch, and a gaming PC through every unit at 4K@120Hz with VRR enabled, measured signal drops, and noted which switches quietly failed when our consoles went to Rest Mode. If your wall-mounted TV only has one or two HDMI 2.1 ports and you own more than one modern console, the right HDMI 2.1 switch solves the port problem without robbing you of the high-refresh picture you paid for.
This roundup focuses on real-world console use rather than spec-sheet theater. We weighted the things forum users on Reddit’s r/OLED_Gaming and AVSForum actually complain about: signal dropouts with PS5 Rest Mode, HDMI-CEC waking consoles that should stay asleep, and the difference between a 48Gbps switch and one that quietly only carries 40Gbps. We also paired this guide with our picks for best HDMI 2.1 TVs for gaming and our list of 4K HDMI 2.1 gaming monitors, since the switch you buy is only as good as the display you plug it into. If you split your time between the couch and a handheld, our guides to the best handheld gaming consoles and best retro gaming consoles cover the rest of your setup.
Our Top 3 HDMI 2.1 Switches for Gaming Consoles
Quick Comparison: Every HDMI 2.1 Switch in 2026
This table covers all eight HDMI 2.1 switches in our roundup with the ports, bandwidth, VRR support, and HDMI 2.1 gaming features that actually matter on PS5 and Xbox Series X. We updated the comparison for 2026 after rerunning every unit with the latest firmware and a fresh crop of Ultra High Speed HDMI cables.
| Product | Features | |
|---|---|---|
 OREI 8K 3-Port HDMI 2.1 Switch |
|
Check Latest Price |
 UGREEN HDMI 2.1 Switch 2 in 1 Out |
|
Check Latest Price |
 avedio links HDMI 2.1 Switch 3 in 1 Out |
|
Check Latest Price |
 JCHICI HDMI 2.1 Switch 4 in 1 Out |
|
Check Latest Price |
 llano HDMI 2.1 Switch 3 in 1 Out |
|
Check Latest Price |
 NEWCARE HDMI 2.1 Switch 3 in 1 Out |
|
Check Latest Price |
 ROOFULL 4 Ports HDMI 2.1 Switch |
|
Check Latest Price |
 Fosmon 8K HDMI Switch Bi-Directional |
|
Check Latest Price |
We earn from qualifying purchases. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
Detailed Reviews: 8 HDMI 2.1 Switches We Tested
1. OREI 8K 3-Port HDMI 2.1 Switch – Best Overall for PS5 and Xbox
- ✓ Full metal housing stays cool under load
- ✓ Dolby Vision and Atmos pass-through verified
- ✓ Auto-switch detects active source reliably
- ✓ VRR and ALLM work without flicker on PS5 and Xbox
- ✓ Includes power adapter for stable signal
- ✕ HDMI-CEC can wake consoles from Rest Mode
- ✕ Costs more than plastic 3-port alternatives
48Gbps bandwidth
3 HDMI 2.1 inputs
Metal housing
VRR/ALLM/QFT
The OREI 3-port switch is the unit I kept reaching for during testing. After three months of bouncing between PS5, Xbox Series X, and an Apple TV 4K, it never dropped signal once at 4K@120Hz with VRR enabled. The full metal housing runs noticeably cooler than every plastic switch on this list, and OREI packs in the gaming-feature trio: VRR, ALLM, and QFT all pass through cleanly.
I particularly appreciated how the OREI handles Dolby Vision. Many switches claim Vision passthrough but quietly downgrade to HDR10. On this unit, the LG C2 OLED detected Dolby Vision from the Apple TV 4K on the very first handshake, and Atmos tracks followed over ARC. Forum users on AVSForum consistently recommend OREI for home theater builds, and our testing confirms the brand’s reputation.
Bandwidth and Signal Integrity
The OREI delivers the full 48Gbps FRL5 pipeline that 4K@120Hz, 8K@60Hz, and uncompressed Dolby Vision need. During testing, we ran 4K@120Hz RGB at full chroma 4:4:4 for several days straight with no blackouts, no flickering, and no audio drops. The included power adapter is UL-certified, which matters because underpowered switches are the leading cause of handshake failures forum users report.
Gaming Feature Verification on PS5 and Xbox
I confirmed VRR and ALLM on both PS5 and Xbox Series X. The OREI correctly negotiates VRR with both consoles, and ALLM flipped the TV into low-latency mode the instant a console went active. There was no measurable input lag spike when switching inputs, which is the single biggest complaint I see on r/OLED_Gaming about cheaper switches.
The HDMI-CEC Quirk You Should Know About
The only real downside is HDMI-CEC passthrough, which is a double-edged sword. With CEC enabled on your consoles, the OREI can wake a sleeping PS5 when you switch to its input. Disable CEC in your console settings if you want true Rest Mode behavior. This is a minor inconvenience, and the trade-off is worth it for the rock-solid signal path.
2. UGREEN HDMI 2.1 Switch 2 in 1 Out – Best Compact Pick for Two Consoles
- ✓ Tucks behind a wall-mounted TV without anyone noticing
- ✓ No power brick needed in most setups
- ✓ Supports 4K@240Hz for future-proof PC use
- ✓ Works flawlessly with LG C2 OLED auto-wake
- ✓ VRR and FreeSync pass through cleanly
- ✕ Only 2 inputs limits multi-console expansion
- ✕ No remote control or auto-switching
- ✕ Some Xbox Series X users see signal drops at 4K@120Hz
48Gbps bandwidth
2 HDMI 2.1 inputs
2.7 inch square footprint
Powered by HDMI
If you live in a two-console household (PS5 plus a Switch, or Xbox Series X plus a gaming PC) and you want the smallest possible switch, the UGREEN 2-in-1-out is the answer. At 2.7 inches square and 0.6 inches thin, it disappears behind a wall-mounted TV. I tested it tucked behind an LG C2 OLED for six weeks, and the only time I thought about it was when the picture looked perfect, which was always.
The UGREEN draws power directly from the HDMI source cables, so there is no brick to hide. In my testing this worked fine on PS5, Xbox Series X, and Switch, but a small number of forum users on r/pcmasterrace report needing the included USB-C power tap when running 4K@120Hz from a less powerful source. If you see intermittent dropouts, plug in the USB-C cable and the problem disappears.
Why 4K@240Hz Matters Even If You Don’t Need It Yet
The UGREEN is one of the few 2-port switches that pushes past 4K@120Hz to 4K@240Hz. Most gamers will never use that ceiling on a console, but if you also plug in a gaming PC, it future-proofs the switch for high-refresh PCVR or competitive shooters. Forum users consistently praise UGREEN for long-term reliability, with multiple owners reporting 12+ months of daily use without issues.
Where the UGREEN Falls Short
Two ports is the obvious limit. If you ever add a third device (a soundbar passthrough, a 4K Blu-ray player, a Steam Deck dock), you will need a bigger switch. The lack of a remote also means you walk to the switch every time, which is fine behind a TV but awkward if the switch lives in an AV rack.
3. avedio links HDMI 2.1 Switch 3 in 1 Out – Best Value With a Bundled Cable
- ✓ Comes with a certified 8K HDMI cable in the box
- ✓ Aluminum shell dissipates heat better than plastic rivals
- ✓ Plug-and-play with no external power needed
- ✓ Compatible with PS5
- ✓ Xbox
- ✓ Roku
- ✓ Fire TV
- ✓ and Blu-ray
- ✓ Strong 6
- ✓ 654-review track record
- ✕ Manual button switching only (no remote)
- ✕ LED indicator is dim and hard to read
- ✕ Button press is noticeably stiff
48Gbps bandwidth
3 HDMI 2.1 inputs
Aluminum housing
8K HDMI cable included
The avedio links 3-in-1-out is the value play that quietly punches above its weight. With over 6,600 reviews, it is the most battle-tested HDMI 2.1 switch on Amazon, and our testing matched the consensus: it just works. The aluminum shell feels more premium than the price suggests, and including a certified 8K HDMI cable in the box means you can plug it in straight out of the packaging without buying anything else.
I ran it for a month as my primary switch on a PS5, Xbox Series X, and Nintendo Switch setup. The picture quality matched the OREI in pure signal terms; the differences showed up only in ergonomics. The avedio links has no remote, so you press the physical button on top of the unit to swap inputs.
Why Aluminum Construction Matters Here
Plastic switches tend to trap heat, especially when running 4K@120Hz for hours. The avedio links aluminum shell dissipated noticeably less warmth in our thermal testing, which translates to longer component life. Forum users on Reddit’s r/consoles frequently report plastic switches failing after 6 to 12 months; aluminum alternatives tend to last longer.
The Ergonomics Trade-Off You Accept
Manual-only switching is the main compromise. If your switch sits within arm’s reach of your couch, this is a non-issue. If it lives in a closed AV cabinet, you will want a switch with a remote. The button is also a bit stiff on this unit, which is a minor annoyance but consistent with what most reviewers mention.
4. JCHICI HDMI 2.1 Switch 4 in 1 Out – Best for Multi-Console Setups
- ✓ Four inputs cover PS5
- ✓ Xbox
- ✓ Switch
- ✓ and PC in one unit
- ✓ USB-C power is easier to cable-manage than barrel jacks
- ✓ VRR and ALLM confirmed on PS5 and Xbox
- ✓ Remote control practical and responsive
- ✓ Handles 4K@120Hz without flicker
- ✕ Some users report occasional random blackouts
- ✕ Xbox CEC is disabled by default and needs configuration
- ✕ Power adapter not compatible with European outlets
48Gbps bandwidth
4 HDMI 2.1 inputs
USB-C power
Remote included
For households running PS5, Xbox Series X, Nintendo Switch, and a gaming PC through a single TV, four HDMI 2.1 inputs is the sweet spot. The JCHICI 4-port switch hits that sweet spot while keeping the price reasonable. I tested it across all four console types, and 4K@120Hz with VRR held up cleanly on every input.
The USB-C power input is a small touch that makes a real difference. Most HDMI switches use barrel-jack adapters that are awkward to hide; USB-C is easier to route, easier to replace if you lose the adapter, and easier to power from a TV’s USB service port if you want a single-cable install.
Audio Passthrough and Dolby Support
JCHICI supports the full Dolby suite including Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, and LPCM 5.1/7.1. In our testing, Dolby Atmos tracks from the Apple TV 4K and Xbox Series X passed through cleanly to a Sonos Arc over ARC. If you route audio through a soundbar, this is one of the safer picks in the 4-port category.
The HDMI-CEC Setup Dance
The JCHICI requires you to enable HDMI-CEC on each connected device for auto-switching to work properly. Xbox Series X in particular has CEC disabled out of the box. Once configured, auto-switching is reliable. If you skip the configuration step, you will think auto-switch is broken when it is actually fine.
5. llano HDMI 2.1 Switch 3 in 1 Out – Best With Included Remote
- ✓ Remote control is genuinely useful from the couch
- ✓ 4K@240Hz support for high-refresh PC gaming
- ✓ VRR and HDR10+ pass through cleanly
- ✓ Auto-switching works with most modern consoles
- ✓ Three switching modes give flexibility
- ✕ HDMI-CEC passthrough is unreliable across consoles
- ✕ Auto-switch can be inconsistent with PS5 and Fire Stick
- ✕ Some users report difficulty waking Fire Stick 4K Max
48Gbps bandwidth
3 HDMI 2.1 inputs
Remote + auto-switching
4K@240Hz support
The llano 3-in-1-out stands out for one simple reason: the remote control actually works at couch distance. Many HDMI switches ship with a remote that has a 3-meter range and a coin-cell battery that dies in a month. The llano remote reached my couch from across a 4-meter living room without issue, and the unit itself is small enough to live anywhere.
I appreciated the 4K@240Hz ceiling for PC gaming. While no current console hits 240Hz, a high-end gaming PC over HDMI 2.1 will, and the llano handled it without dropping frames. The aluminum alloy case ran cool even during long 4K@120Hz sessions.
Three Switching Modes Explained
The llano gives you remote, auto, and manual button switching. In practice, auto-switching is the most convenient when it works. With my PS5, the llano reliably auto-switched when I woke the console. With the Fire Stick 4K Max, auto-switch was inconsistent, and I had to use the remote. This matches what forum users on AVSForum report.
HDMI-CEC Is the Weak Link
CEC passthrough on the llano is hit-or-miss. Universal remote control of consoles through the switch does not work reliably, so if you depend on a single remote for your whole setup, plan to use the included remote or a Logitech Harmony hub. For pure signal switching, the llano performs well.
6. NEWCARE HDMI 2.1 Switch 3 in 1 Out – Best Auto-Switching for Modern Setups
- ✓ Auto-switching works reliably with Roku and Nintendo Switch
- ✓ Includes USB-C cable for stable power delivery
- ✓ Good picture quality at 4K and 8K resolutions
- ✓ Bestseller rank #5 in HDMI selector boxes
- ✓ Three input options cover most household needs
- ✕ Remote range shorter than the 10m claim
- ✕ PS5 tends to hog the active input and prevent switching
- ✕ Indicator light is small and dim
- ✕ Does not sit flat on every surface
48Gbps bandwidth
3 HDMI 2.1 inputs
Remote 10m range
Auto-switch
NEWCARE’s HDMI 2.1 switch has earned its #5 bestseller rank by making auto-switching actually work on the devices most people own. In testing, auto-switching engaged within 2 seconds when I woke a Roku Ultra or powered on a Nintendo Switch. PS5 was the one exception: PS5’s Rest Mode keeps a low-voltage signal on the HDMI line, which confuses most auto-switching logic including this one.
If your setup is Switch plus streaming plus a third device, the NEWCARE is one of the most seamless options. If PS5 is your primary console, you will want to use the remote or manual button.
Why USB-C Power Helps Stability
The included USB-C cable provides a steady 5V/1A feed to the switch, which keeps the HDMI signal handshake stable. Many forum complaints about HDMI switches turning off mid-session trace back to insufficient power. The NEWCARE avoids that by making external power mandatory and bundling the right cable.
The PS5 Standby Voltage Problem
PS5 in Rest Mode does not fully power down its HDMI port, which tricks most auto-switching switches into thinking the PS5 is still the active source. This is a known industry issue, not a NEWCARE defect. The workaround is to enable Rest Mode features that fully power down HDMI, or to use the manual remote.
7. ROOFULL 4 Ports HDMI 2.1 Switch – Best 4-Port Build With Long Warranty
- ✓ Four ports handle PS5
- ✓ Xbox
- ✓ Switch
- ✓ and a soundbar
- ✓ Remote reaches across a typical living room at 33 ft
- ✓ UL-certified power adapter included for safety
- ✓ Auto-switching works with most modern devices
- ✓ 2-year warranty is twice the industry standard
- ✕ Limited to 10 ft total cable length for best performance
- ✕ Some devices keep standby voltage that confuses auto-switch
- ✕ A handful of users report occasional blackouts
48Gbps bandwidth
4 HDMI 2.1 inputs
Remote 33 ft range
2-year warranty
ROOFULL’s 4-port switch is the rare HDMI 2.1 switch with a 2-year warranty, which says something about how confident the brand is in long-term reliability. We tested it with PS5, Xbox Series X, Nintendo Switch 2, and a gaming PC, and the 48Gbps pipeline held up under all four at once without thermal throttling.
The 33-foot remote range is the longest in this roundup. If your switch lives in a closed cabinet across the room, the ROOFULL remote still reaches it. The UL-certified power adapter is another trust signal that cheaper 4-port switches often skip.
The 10-Foot Cable Limit Explained
ROOFULL rates the switch for a total cable length of 10 feet from source to display. That is two 5-foot HDMI cables or one 10-foot run. Longer runs are possible but you may see signal degradation at the highest refresh rates. For runs over 10 feet, ROOFULL recommends active HDMI cables or fiber optic HDMI.
Standby Voltage and Auto-Switch Quirks
PS5 and Fire TV devices keep a small voltage on the HDMI line even when off, which can prevent auto-switching from moving to a different active source. The fix is the same as with other switches: enable deep standby, or use the remote. Forum users have documented this behavior across many brands.
8. Fosmon 8K HDMI Switch Bi-Directional – Best Bi-Directional Flexibility
- ✓ Bi-directional lets you split one source to two displays or combine two sources to one display
- ✓ No external power needed thanks to HDMI bus power
- ✓ Gold-plated connectors resist corrosion over time
- ✓ Aluminum housing provides good heat dissipation
- ✓ Limited lifetime warranty from Fosmon
- ✕ Only 2 ports limits multi-console households
- ✕ Lower bestseller rank than competitors
- ✕ Manual switching only with no remote or auto-switch
48Gbps bandwidth
Bi-directional 2x1 or 1x2
Aluminum housing
No power required
The Fosmon bi-directional switch is the right answer for setups that occasionally run in reverse. Most HDMI 2.1 switches only go from many-to-one. The Fosmon can do that, but it can also do one-to-many, which is useful if you want to share a single source between two displays (a living room TV and a bedroom monitor, for example). It is the only switch in this roundup with that flexibility.
The aluminum housing and gold-plated connectors feel solid, and the limited lifetime warranty from Fosmon is a real trust signal. In testing, the bi-directional switch flipped between modes with a single button press, no rebooting required.
Bi-Directional Mode in Practice
In 2-in-1-out mode, the Fosmon behaves like any other HDMI switch. In 1-in-2-out mode, it acts as a splitter, routing a single source to two displays. The catch is that both displays show the same content, and the switch outputs to whichever display is powered on. This is a niche use case but it is the niche Fosmon built this switch for.
Why Only 2 Ports Limits This Pick
If you have three or more consoles, the Fosmon will not fit your needs. For a single PS5 plus a Switch setup, or for one-to-many display sharing, the Fosmon is a thoughtful pick at a budget price. Anything more ambitious, look at the 3-port or 4-port options higher on this list.
Buying Guide: How to Pick the Right HDMI 2.1 Switch for Your Setup
Choosing between HDMI 2.1 switches is less about brand and more about matching the switch’s capabilities to your specific console mix and your TV’s limitations. This buying guide covers the decisions that actually affect picture quality and reliability, from bandwidth to cable length. If you already own one of the best HDMI 2.1 TVs for gaming, the right switch will keep every port busy.
Why 48Gbps Bandwidth Matters More Than the HDMI 2.1 Label
The HDMI 2.1 specification allows for up to 48Gbps, but not every device labeled HDMI 2.1 actually delivers that. Some switches and cables only support 40Gbps, which is enough for 4K@120Hz at 4:2:0 chroma but not for uncompressed 4K@120Hz at 4:4:4 chroma or 8K signals. If a switch does not explicitly advertise 48Gbps, assume it is the slower variant and pass on it.
For console gaming, 48Gbps is mostly insurance. Current PS5 and Xbox Series X games run at 4K@120Hz with 4:2:2 chroma, which fits inside 40Gbps. But if you ever upgrade to a TV that supports higher chroma, or if you also route a gaming PC through the same switch, the 48Gbps headroom prevents you from needing to swap the switch later.
VRR, ALLM, and QFT: The Gaming Trio You Cannot Skip
VRR (Variable Refresh Rate) eliminates screen tearing by syncing the display’s refresh rate to the console’s frame rate. ALLM (Auto Low Latency Mode) tells your TV to switch into Game Mode the instant it detects a console signal. QFT (Quick Frame Transport) reduces input lag by sending frames faster over the cable. Every HDMI 2.1 switch on this list supports all three, but verify before you buy a no-name brand.
If your TV does not support VRR, the switch will still pass through the signal, but the TV will not engage VRR mode. Check our guide to the 4K HDMI 2.1 gaming monitors for displays that unlock the full VRR experience.
How Many Ports Do You Actually Need?
Count the devices you want connected and add one. Two consoles plus a streaming stick means three ports minimum. Add a soundbar or a gaming PC and you are at four. Five-port switches are rare in HDMI 2.1 and tend to be expensive; if you need five, consider whether a 4K HDMI 2.1 matrix switch is a better fit, or whether you can consolidate streaming into a smart TV app.
For most gamers, three ports is the right answer. The OREI, llano, NEWCARE, and avedio links all hit the 3-port sweet spot with the gaming-feature set intact.
Auto-Switching vs Manual Switching in Real Use
Auto-switching sounds magical in product copy, but real-world behavior depends on the devices you connect. PS5’s standby voltage and Apple TV’s deep sleep modes both confuse auto-switching logic on most switches. If you want reliable auto-switching, the NEWCARE and OREI perform best in our testing. If you want a manual switch that never gets confused, the avedio links is the value pick.
Forum users on Reddit’s r/OLED_Gaming and AVSForum consistently report that auto-switching improves when you enable HDMI-CEC on every connected device, including the TV. The default CEC settings on most consoles are inconsistent, so a few minutes of configuration pays off in better auto-switch behavior.
Cables, eARC, and the Things Switches Cannot Fix
An HDMI 2.1 switch is only as good as the cables around it. Use certified Ultra High Speed HDMI cables (the ones with the QR certification sticker) on every leg of the connection. Cheap “High Speed” cables will pass a 4K@60Hz signal but drop frames at 4K@120Hz or refuse to engage VRR. For runs over 10 feet, use an active or fiber optic HDMI cable.
If your soundbar connects to your TV over eARC (Enhanced Audio Return Channel), the switch does not interfere with that path. eARC lives between the TV and the soundbar, not between the switch and the TV. However, if you route the soundbar through the switch to consolidate cables, you will lose eARC’s lossless audio formats. Keep eARC on a direct TV-to-soundbar connection for Dolby TrueHD and DTS-HD Master Audio.
For setups that need both video switching and computer peripheral sharing, our roundup of the best KVM switches for gaming PCs covers devices that combine HDMI switching with USB keyboard, mouse, and audio routing.
Frequently Asked Questions
What is the best HDMI switch for gaming consoles?
The best HDMI switch for gaming consoles is one that supports the full 48Gbps HDMI 2.1 bandwidth, passes through VRR (Variable Refresh Rate) and ALLM (Auto Low Latency Mode), and has enough ports for your setup. For most gamers, the OREI 8K 3-Port HDMI 2.1 Switch is our top pick for its metal housing, reliable auto-switching, and confirmed Dolby Vision and Atmos passthrough. For two-console setups on a budget, the UGREEN 2-in-1-out delivers the same bandwidth in a smaller footprint.
Is HDMI 2.1 better for gaming?
Yes, HDMI 2.1 is meaningfully better for gaming compared to HDMI 2.0. HDMI 2.1 doubles the bandwidth from 18Gbps to 48Gbps, which enables 4K@120Hz, 8K@60Hz, Variable Refresh Rate (VRR) for tear-free gameplay, Auto Low Latency Mode (ALLM) that puts your TV into Game Mode automatically, and Quick Frame Transport (QFT) that reduces input lag. If you own a PS5 or Xbox Series X, an HDMI 2.1 switch preserves every gaming advantage your console offers.
Are there HDMI 2.1 switches worth buying?
Yes, HDMI 2.1 switches are worth buying if your TV has fewer HDMI 2.1 ports than consoles. Most modern TVs only include one or two HDMI 2.1 ports, but gamers often own a PS5, an Xbox Series X, a Nintendo Switch, and sometimes a gaming PC, all of which benefit from HDMI 2.1 features. A quality HDMI 2.1 switch lets you connect everything without constantly swapping cables behind the TV.
What is the best HDMI 2.1 cable for gaming?
The best HDMI 2.1 cable for gaming is one certified as Ultra High Speed by the official HDMI Licensing Administrator program. These cables carry the official QR-code certification label and are guaranteed to support the full 48Gbps bandwidth, 4K@120Hz, 8K@60Hz, VRR, and ALLM. For runs under 10 feet, standard passive Ultra High Speed cables work. For runs over 10 feet, use an active or fiber optic HDMI 2.1 cable to avoid signal degradation.
Do HDMI switches add input lag?
Quality HDMI 2.1 switches add no measurable input lag in gaming. In our testing across 90 days with PS5 and Xbox Series X, the OREI, UGREEN, avedio links, and JCHICI switches all delivered signal latency indistinguishable from a direct connection. Cheap switches that only support 40Gbps or that lack proper HDMI 2.1 chipsets can introduce lag, handshake delays, or signal drops, which is why we focused this roundup on switches that actually deliver the 48Gbps they advertise.
Final Verdict: Which HDMI 2.1 Switch Should You Buy?
After 90 days of testing, the OREI 8K 3-Port HDMI 2.1 Switch remains our editor’s choice for gaming consoles because it pairs full 48Gbps bandwidth with metal housing, reliable VRR/ALLM passthrough, and the cleanest auto-switching we found. If you only need two inputs, the UGREEN HDMI 2.1 Switch 2-in-1-out is the best compact pick for a PS5 plus Switch or Xbox plus PC setup. If you want the most battle-tested value with over 6,600 reviews and a bundled cable, the avedio links 3-in-1-out is the right call.
For multi-console households with four devices, the JCHICI 4-port switch or the ROOFULL 4-port switch (with a 2-year warranty) both deliver reliable 4K@120Hz. The llano 3-port switch is the best remote-equipped option for AV-cabinet installs, while the NEWCARE 3-port switch handles auto-switching better than most. Finally, if you need bi-directional flexibility for occasional display sharing, the Fosmon 8K HDMI Switch is the only switch in this roundup that splits or combines sources.
Whichever HDMI 2.1 switch you pick, pair it with certified Ultra High Speed HDMI cables on every leg of the connection, enable HDMI-CEC on every connected device, and your multi-console setup will finally feel like one cohesive gaming system. The days of crawling behind the TV to swap cables are over.
